 |
XRME210210135
XINDRAY
1.Can run and produce water continuously, highly automatic, auto membrane/filter flushing
2.No need chemical to regeneration,easy operation and maintainance
3.Pumps are from CNP, DOW ro membrane
4.Automatic switch on when lack of water,and switch off when no water or full of water.
5.RO membrane auto wash and reduce the pollution speed.
6.Low-pressure switch protects high-pressure pump from damage when water supply stops.
7.Production water condutivity meter monitors water quality online contionuosly.
8.Input water and dense water pressure meters, monitor the RO differential pressure and remind the time of washing.
9.PLC control screen panel, easy operation and control
10.Long life span:8-10 years
Technical Specification:
| Equipment main techniques | Pre-treatment + Double stage RO (directly connected) + Circulated pipes to all wards |
Soluble salt removal rate | 99.50% |
Water flow (25℃ water temperature) | 1500L/H |
Total power | 8KW |
Installation site required | ≥15㎡ |
Host size(W*L*H) | 900*1850*1650 |
Overall height | 2.7T |
Equipment operating pressure | 0.8~1.2Mpa |
Ratio of recycle | 50~75% |
Disinfection | Peracetic acid as chemical disinfection and heat disinfection as option |
Power supply | AC 380V±10% three-phase-five-wire system frequency 50~60HZ |
Water inlet | City tap water meets standard of GB5749, temperature 5~40 degrees |
Drainage and ground | Floor with drainage site and waterproof treated floor |
Indoor environment of installation | Indoor air humidity≤80% |
1.Can run and produce water continuously, highly automatic, auto membrane/filter flushing
2.No need chemical to regeneration,easy operation and maintainance
3.Pumps are from CNP, DOW ro membrane
4.Automatic switch on when lack of water,and switch off when no water or full of water.
5.RO membrane auto wash and reduce the pollution speed.
6.Low-pressure switch protects high-pressure pump from damage when water supply stops.
7.Production water condutivity meter monitors water quality online contionuosly.
8.Input water and dense water pressure meters, monitor the RO differential pressure and remind the time of washing.
9.PLC control screen panel, easy operation and control
10.Long life span:8-10 years
Technical Specification:
| Equipment main techniques | Pre-treatment + Double stage RO (directly connected) + Circulated pipes to all wards |
Soluble salt removal rate | 99.50% |
Water flow (25℃ water temperature) | 1500L/H |
Total power | 8KW |
Installation site required | ≥15㎡ |
Host size(W*L*H) | 900*1850*1650 |
Overall height | 2.7T |
Equipment operating pressure | 0.8~1.2Mpa |
Ratio of recycle | 50~75% |
Disinfection | Peracetic acid as chemical disinfection and heat disinfection as option |
Power supply | AC 380V±10% three-phase-five-wire system frequency 50~60HZ |
Water inlet | City tap water meets standard of GB5749, temperature 5~40 degrees |
Drainage and ground | Floor with drainage site and waterproof treated floor |
Indoor environment of installation | Indoor air humidity≤80% |
