Availability: | |
---|---|
XRME210210136
XINDRAY
1) Adopts imported RO membrane from America, which can remove 99.7% inorganic salt, heavy metal ion and completely get rid of colloid, microbiology organic materials, germ, protozoa, pathogens, bacteria, inorganic chemical and so on.
2) No need to add any chemicals, stable pure water quality, and no pollution drained, low produce cost.
3) Equipped with pretreatment system, such as active carbon absorption filter and PP sediment filter.
4) 304 stainless steel rack and pipe accessories connection.
5) Equipped with auto pressure protection system and on -line monitor.
6) Automatically and manually wash RO membrane. Also the design of washing the RO membrane is by chemical solution (citric acid or sodium hydroxide optional).
7) The lifespan of the whole system is long, operation simple, the applicability is strong
Technical Specification:
Equipment main techniques | Pre-treatment + Double stage RO (directly connected) + Circulated pipes to all wards |
Soluble salt removal rate | 99.50% |
Water flow (25℃ water temperature) | 3600L/H |
Total power | 15KW |
Installation site required | ≥20㎡ |
Host size(W*L*H) | 1000*2550*1650 |
Overall height | 5.3T |
Equipment operating pressure | 0.8~1.2Mpa |
Ratio of recycle | 50~75% |
Disinfection | Peracetic acid as chemical disinfection and heat disinfection as option |
Power supply | AC 380V±10% three-phase-five-wire system frequency 50~60HZ |
Water inlet | City tap water meets standard of GB5749, temperature 5~40 degrees |
Drainage and ground | Floor with drainage site and waterproof treated floor |
Indoor environment of installation | Indoor air humidity≤80% |
1) Adopts imported RO membrane from America, which can remove 99.7% inorganic salt, heavy metal ion and completely get rid of colloid, microbiology organic materials, germ, protozoa, pathogens, bacteria, inorganic chemical and so on.
2) No need to add any chemicals, stable pure water quality, and no pollution drained, low produce cost.
3) Equipped with pretreatment system, such as active carbon absorption filter and PP sediment filter.
4) 304 stainless steel rack and pipe accessories connection.
5) Equipped with auto pressure protection system and on -line monitor.
6) Automatically and manually wash RO membrane. Also the design of washing the RO membrane is by chemical solution (citric acid or sodium hydroxide optional).
7) The lifespan of the whole system is long, operation simple, the applicability is strong
Technical Specification:
Equipment main techniques | Pre-treatment + Double stage RO (directly connected) + Circulated pipes to all wards |
Soluble salt removal rate | 99.50% |
Water flow (25℃ water temperature) | 3600L/H |
Total power | 15KW |
Installation site required | ≥20㎡ |
Host size(W*L*H) | 1000*2550*1650 |
Overall height | 5.3T |
Equipment operating pressure | 0.8~1.2Mpa |
Ratio of recycle | 50~75% |
Disinfection | Peracetic acid as chemical disinfection and heat disinfection as option |
Power supply | AC 380V±10% three-phase-five-wire system frequency 50~60HZ |
Water inlet | City tap water meets standard of GB5749, temperature 5~40 degrees |
Drainage and ground | Floor with drainage site and waterproof treated floor |
Indoor environment of installation | Indoor air humidity≤80% |